banner
Home > Knowledge > Content

Protection and reinforcement of cargo carried by plastic pads

Dec 21, 2021

Protection and reinforcement of goods carried on pallets

After the goods carried by the pallet are fixed, those who still cannot meet the transportation requirements should choose protective reinforcement accessories as needed. Reinforced protective accessories are made of paper, wood, plastic, metal or other materials.

Precautions for the use of pallets with forklifts, shelves, etc.

1. During the use of pallets by hydraulic trucks and forklifts, the distance between the forks should be as wide as possible to the outer edge of the fork inlet of the pallet, and the depth of the fork should be greater than 2/3 of the depth of the entire pallet.

2. During the movement of the pallet, hydraulic trucks and forklifts should maintain a uniform speed to advance, retreat and go up and down to avoid sudden braking and sudden turning that cause damage to the pallet and cause the goods to collapse.

3. When the pallet is placed on the shelf, the pallet should be kept stable on the shelf beam, and the length of the pallet should be more than 50mm greater than the outer diameter of the shelf beam.

Precautions for using plastic pallets (plastic pallets)

1. The single-sided plastic tray can only be used on one side. The surface has two types: grid-shaped and flat-shaped.

2. Double-sided plastic tray means that the front and back sides of the tray have the same structure, and the surface has two types: grid-shaped and flat-shaped. The choice of single-sided pallet or double-sided pallet should be determined according to the corresponding storage, loading and unloading handling equipment and status (such as warehouse type, shelf type, stacking or placement status, etc.).

3. Dynamic load refers to the maximum weight that the pallet can carry during movement when a motorized forklift or manual hydraulic pallet truck is used (with a curvature of less than 1.5% is normal).

4. Static load refers to the maximum weight that the bottom plastic pallet can bear in stacking.

5. Shelf load refers to the maximum weight that the plastic pallet with loaded goods can bear when placed on the shelf (the bending degree is within 1% is normal). Generally, the standard series pallets can bear a load of 0.4T~0.6T when the shelf is loaded, and the heavy-duty series pallets can bear a load of 0.7T~1T.